Filter
(found 88 products)
Book cover image
Anthony Dear argues that just-in-time is essentially a philosophy rather than a rigid methodology and that the important thing is to grasp the fundamental ideas involved and then to see where, how and to what extent they can be applied in the context of any particular enterprise. The book is ...
Working Towards Just-in-Time
Anthony Dear argues that just-in-time is essentially a philosophy rather than a rigid methodology and that the important thing is to grasp the fundamental ideas involved and then to see where, how and to what extent they can be applied in the context of any particular enterprise. The book is written in a refreshingly direct manner and the discussion focuses on the kind of practical issues which are likely to concern working managers. Illustrated with a wealth of examples drawn from the author's own experience, Working Towards Just-in-Time tackles its subject in a fashion which has direct and immediate relevance to managers of small and medium-sized companies and to middle management in larger firms. This book should be of interest to managers of small and medium-sized companies; middle management in larger firms.
https://magrudy-assets.storage.googleapis.com/9781850916505.jpg
124.950000 USD

Working Towards Just-in-Time

by Anthony Dear
Hardback
Book cover image
Fibre-reinforced plastic (FRP) composite materials are basically of two types. The first type is short fibres reinforced in a plastic matrix, and the other type continuous (long) fibres reinforced in a plastic matrix. The exact distinction between a short and a continuous fibre is discussed in Chapter 1. Continuous fibre-reinforced ...
Mechanics of Fibrous Composites
Fibre-reinforced plastic (FRP) composite materials are basically of two types. The first type is short fibres reinforced in a plastic matrix, and the other type continuous (long) fibres reinforced in a plastic matrix. The exact distinction between a short and a continuous fibre is discussed in Chapter 1. Continuous fibre-reinforced composite materials are referred to by many labels: FRP composites, advanced composites, fibrous composites, composite materials or simply composites. These terms are now generally accepted to mean the same type of material, namely, continuous fibre reinforced in plastic. In this book, the term fibrous composites is used to define a continuous fibre reinforced in plastic. Fibrous composites are presently in use for a variety of structural applica tions, and may offer an alternative to conventional metallic materials. The behaviour of fibrous composites subjected to a loading condition is very different from that of a metallic isotropic material. Therefore, 'new' analytical and testing methods are required to analyse a structural element and sections made from layered fibrous composites. There are a number of books written on the subject of composite materials. All of these are excellent in their content and achieve the authors' objectives.
https://magrudy-assets.storage.googleapis.com/9781851666003.jpg
367.490000 USD

Mechanics of Fibrous Composites

by Mahmood Husein Datoo
Hardback
Book cover image
Aimed at manufacturing managers and engineers looking for an introduction to computer vision and its potential, this book discusses the areas in which machine vision is being used, explains different types of machine vision hardware and software and summarizes research at several universities. The book's key chapter highlights the use ...
Machine Vision
Aimed at manufacturing managers and engineers looking for an introduction to computer vision and its potential, this book discusses the areas in which machine vision is being used, explains different types of machine vision hardware and software and summarizes research at several universities. The book's key chapter highlights the use of machine vision for automated inspections, discussing cases in bottling, parts, printed circuit board inspection and inspection and other areas. The authors explain how to pinpoint areas where machine vision can be applied effectively and the factors to consider. Included is a glossary of computer vision terms and a list of machine vision companies. This book should be of interest to manufacturing managers and engineers.
https://magrudy-assets.storage.googleapis.com/9780442237370.jpg
259.350000 USD

Machine Vision

by Nello Zeuch, Richard K. Miller
Hardback
Book cover image
Mechanics of Creep Brittle Materials-l was published in 1989 as the proceedings of a Colloquium held in Leicester in the summer of 1988. The Colloquium examined the creep response of a wide range of materials, including metals, engineering ceramics and ice, with the aim of determining similarities in the response ...
Mechanics of Creep Brittle Materials 2
Mechanics of Creep Brittle Materials-l was published in 1989 as the proceedings of a Colloquium held in Leicester in the summer of 1988. The Colloquium examined the creep response of a wide range of materials, including metals, engineering ceramics and ice, with the aim of determining similarities in the response of these materials and the way in which their behaviour is modelled. The proceedings were structured so as nature of the Colloquium, with papers to reflect the interdisciplinary grouped together largely on the basis of the phenomena being examined, rather than by class of material. Mechanics of Creep Brittle Materials-2 was held in Leicester in Septem ber 1991 to discuss advances made in our understanding of the response of creep brittle materials since the first Colloquium. The scope of the Colloquium was extended to include mineral salts, concrete and com posite systems. These proceedings are once more structured so that the reader can readily compare the response of different material systems and evaluate the suitability of the range of models presented to the materials he is interested in. In fact a number of papers directly compare the of a range of different materials with the aim of identifying behaviour general strategies for the testing and modelling of creeping materials.
https://magrudy-assets.storage.googleapis.com/9781851667017.jpg
103.950000 USD

Mechanics of Creep Brittle Materials 2

Hardback
Book cover image
A general introduction to expert systems dealing with uncertainty and learning methods; describing the most common methods and pointing out their deficiencies.
Expert Systems: Uncertainty and Learning
A general introduction to expert systems dealing with uncertainty and learning methods; describing the most common methods and pointing out their deficiencies.
https://magrudy-assets.storage.googleapis.com/9781851666645.jpg
345.450000 USD

Expert Systems: Uncertainty and Learning

by Elena Alvarez, Enrique Castillo
Hardback
Book cover image
Written in 1942-43, this book explores France and French culture at a time when France seemed cut off. The book is obsessed with the pleasures of life at a time when nearly all pleasures were forbidden. It proclaims its faith in the unity and continuity of Western culture in its ...
Developments in Plastics Technology
Written in 1942-43, this book explores France and French culture at a time when France seemed cut off. The book is obsessed with the pleasures of life at a time when nearly all pleasures were forbidden. It proclaims its faith in the unity and continuity of Western culture in its moment of greatest crisis in the war years. Connnolly assumed the name of Palinurus - Aeneas' pilot - to suggest the core of melancholy which lies at the heart of this book. A lament for a vanishing world, this book is also a spiritual odyssey, a meditation on literature, love, nature and religion and a collection of aphorisms and epigrams. By the author of The Rock Pool, Enemies of Promise and The Evening Colonnade.
https://magrudy-assets.storage.googleapis.com/9780853343677.jpg
376.950000 USD

Developments in Plastics Technology

Hardback
Book cover image
This book provides not only a comprehensive introduction to the subject, but also describes in details the many techniques which can be used. These cover the detection, sampling and analysis of particles and identify those most relevant to particular applications.
Handbook of Wear Debris Analysis and Particle Detection in Liquids
This book provides not only a comprehensive introduction to the subject, but also describes in details the many techniques which can be used. These cover the detection, sampling and analysis of particles and identify those most relevant to particular applications.
https://magrudy-assets.storage.googleapis.com/9781851669622.jpg
419.990000 USD

Handbook of Wear Debris Analysis and Particle Detection in Liquids

by Trevor M. Hunt
Hardback
Book cover image
The need for a general collection of electroacoustical reference and design data in graphical form has been felt by acousticians and engineers for some time. This type of data can otherwise only be found in a collection of handbooks. Therefore, it is the author's intention that this book serve as ...
Electroacoustical Reference Data
The need for a general collection of electroacoustical reference and design data in graphical form has been felt by acousticians and engineers for some time. This type of data can otherwise only be found in a collection of handbooks. Therefore, it is the author's intention that this book serve as a single source for many electroacoustical reference and system design requirements. In form, the volume closely resembles Frank Massa's Acoustic Design Charts, a handy book dating from 1942 that has long been out of print. The basic format of Massa's book has been followed here: For each entry, graphical data are presented on the right page, while text, examples, and refer ences appear on the left page. In this manner, the user can solve a given problem without thumbing from one page to the next. All graphs and charts have been scaled for ease in data entry and reading. The book is divided into the following sections: A. General Acoustical Relationships. This section covers the behavior of sound transmis sion in reverberant and free fields, sound absorption and diffraction, and directional characteris tics of basic sound radiators. B. Loudspeakers. Loudspeakers are discussed in terms of basic relationships regarding cone excursion, sensitivity, efficiency, and directivity index, power ratings, and architectural layout. c. Microphones. The topics in this section include microphone sensitivity and noise rating, analysis of directional properties, stereo microphone array characteristics, proximity effects, and boundary conditions. D. Signal Transmission.
https://magrudy-assets.storage.googleapis.com/9780442013974.jpg
209.990000 USD

Electroacoustical Reference Data

Hardback
Book cover image
The use of precast concrete is a well-established construction technique for beams, floors, panels, piles, walls and other structural elements. The advan tages of precasting include excellent quality control, economical large scale production, improved construction productivity (especially in adverse weather conditions) and immediate structure availability. These advantages have been recognized ...
Precast Concrete Raft Units
The use of precast concrete is a well-established construction technique for beams, floors, panels, piles, walls and other structural elements. The advan tages of precasting include excellent quality control, economical large scale production, improved construction productivity (especially in adverse weather conditions) and immediate structure availability. These advantages have been recognized for precast concrete raft pavement units (raft units) since their introduction in the 1930s. In the last ten years there has been a considerable increase in the use ofraft units, especially in their range of applications, their analysis and their design. However, the description of these developments has been published in academicjournals and conference proceedings which are not readily available to practising raft unit pavement design engineers. Pavement design engineers are underincreasingpressure to produce raft unit designs that are inexpensive, long lasting and able to allow reorganization to accommodate changing use and uncertainty offuture loading requirements. This is the first book devoted to raft unit pavements, and will become a standard work of reference.
https://magrudy-assets.storage.googleapis.com/9780442302962.jpg
419.990000 USD

Precast Concrete Raft Units

by J. W. Bull
Hardback
Book cover image
The boundary element method (BEM) is now a well-established numerical technique which provides an efficient alternative to the prevailing finite difference and finite element methods for the solution of a wide range of engineering problems. The main advantage of the BEM is its unique ability to provide a complete problem ...
Dual Reciprocity Boundary Element Method
The boundary element method (BEM) is now a well-established numerical technique which provides an efficient alternative to the prevailing finite difference and finite element methods for the solution of a wide range of engineering problems. The main advantage of the BEM is its unique ability to provide a complete problem solution in terms of boundary values only, with substantial savings in computer time and data preparation effort. An initial restriction of the BEM was that the fundamental solution to the original partial differential equation was required in order to obtain an equivalent boundary in- tegral equation. Another was that non-homogeneous terms accounting for effects such as distributed loads were included in the formulation by means of domain integrals, thus making the technique lose the attraction of its boundary-only character. Many different approaches have been developed to overcome these problems. It is our opinion that the most successful so far is the dual reciprocity method (DRM), which is the subject matter of this book. The basic idea behind this approach is to employ a fundamental solution corresponding to a simpler equation and to treat the remaining terms, as well as other non-homogeneous terms in the original equation, through a procedure which involves a series expansion using global approximating functions and the application of reciprocity principles.
https://magrudy-assets.storage.googleapis.com/9781851667000.jpg
103.950000 USD

Dual Reciprocity Boundary Element Method

Hardback
Book cover image
This book should be of interest to manufacturers of plastics products and fillers, plastics designers, engineers and polymer chemists.
Handbook Of Fillers For Plastics
This book should be of interest to manufacturers of plastics products and fillers, plastics designers, engineers and polymer chemists.
https://magrudy-assets.storage.googleapis.com/9780442260248.jpg
602.700000 USD

Handbook Of Fillers For Plastics

by John V. Milewski, Harry S Katz
Hardback
Book cover image
The aim of this book is to provide an introduction to the increasingly exploited technology of Hot Isostatic Pressing (HIPping). It is intended for two audiences. Firstly, the manufacturing or design engineer who may not have a materials science background, but who needs to develop an appreciation of the scope ...
Hot Isostatic Processing
The aim of this book is to provide an introduction to the increasingly exploited technology of Hot Isostatic Pressing (HIPping). It is intended for two audiences. Firstly, the manufacturing or design engineer who may not have a materials science background, but who needs to develop an appreciation of the scope of the HIPping process. Secondly, the engineering or materials undergraduate who needs to understand how HIPping as a modern manufacturing method can offer potential improvements to material properties relative to more conventional techniques. In view of the breadth of potential readership the text is written as far as possible in such a way that technical terms are explained as the reader goes along. There is little mathematics and the focus is on discussing the principal issues. For the reader who wishes to pursue the subject a further reading section has been compiled. For the student, a number of worked examples are also provided. Most of the worked examples are accessible to anyone with a good grasp of A-level physics.
https://magrudy-assets.storage.googleapis.com/9780750300735.jpg
230.990000 USD

Hot Isostatic Processing

by B.A. Rickinson, H.V. Atkinson
Hardback
Book cover image
Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current ...
Hydraulic and Electro-Hydraulic Control Systems
Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power at fractional horsepower level. A further, and frequently range, specifically overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
https://magrudy-assets.storage.googleapis.com/9781851665563.jpg
314.990000 USD

Hydraulic and Electro-Hydraulic Control Systems

by R. B. Walters
Hardback
Book cover image
Proceedings of the Ninth International Conference on Computational Methods in Water Resources, held at the University of Colorado at Denver, USA, June 1992. Co-published with Computational Mechanics Publications, UK.
Computational Methods in Water Resources IX: Two volume set
Proceedings of the Ninth International Conference on Computational Methods in Water Resources, held at the University of Colorado at Denver, USA, June 1992. Co-published with Computational Mechanics Publications, UK.
https://magrudy-assets.storage.googleapis.com/9781851668717.jpg
1678.950000 USD

Computational Methods in Water Resources IX: Two volume set

Hardback
Book cover image
The pressing of sheet metal into useful shapes is a technology which requires an understanding of a wide range of subjects. This text is divided into three sections: processes, materials and tests. In Part 1, sheet metal forming is examined mainly from a mechanical engineering viewpoint; firstly plasticity and anisotropy, ...
Sheet Metal Forming
The pressing of sheet metal into useful shapes is a technology which requires an understanding of a wide range of subjects. This text is divided into three sections: processes, materials and tests. In Part 1, sheet metal forming is examined mainly from a mechanical engineering viewpoint; firstly plasticity and anisotropy, then process variables - friction, lubrication and temperature - and finally practical aspects of forming in the press-shop. Part 2 deals with the main sheet alloys at varying lengths, depending on their industrial popularity. Certain research results, showing the fallibility of the phenomenological approach, are also highlighted. A section of testing procedures concludes the volume.
https://magrudy-assets.storage.googleapis.com/9780750301015.jpg
293.990000 USD

Sheet Metal Forming

by R. Pearce
Hardback
Book cover image
This book covers the major areas of active research and uses and although advanced it presents the basic theory of how to apply BEM in acoustics as well as specific formulations for more complicated problems.
Boundary Element Methods in Acoustics
This book covers the major areas of active research and uses and although advanced it presents the basic theory of how to apply BEM in acoustics as well as specific formulations for more complicated problems.
https://magrudy-assets.storage.googleapis.com/9781851666799.jpg
362.250000 USD

Boundary Element Methods in Acoustics

Hardback
Book cover image
As ironmakers are well aware, it was only a few decades ago that the blast furnace was viewed as a strange 'black box'. Recently, however, various in-furnace phenomena have become the subject of serious scientific study, largely as the result of the 'dissection' of dead furnaces, together with the development ...
Blast Furnace Phenomena and Modelling
As ironmakers are well aware, it was only a few decades ago that the blast furnace was viewed as a strange 'black box'. Recently, however, various in-furnace phenomena have become the subject of serious scientific study, largely as the result of the 'dissection' of dead furnaces, together with the development of advanced monitoring and control techniques. In this way, a new frontier has been opened within the venerable domain of metallurgy. In the light of these new developments, the Committee on Reaction within Blast Furnaces was set up in March 1977 by the Joint Society ofIron and Steel Basic Research - a cooperative research organization of the Iron and Steel Institute of Japan (ISIJ), the Japan Institute of Metals (JIM) and the Japan Society for the Promotion of Science (JSPS). Consisting of twenty-six members and advisors drawn from the fields of academia and industry, this committee collected, discussed, and evaluated numerous papers during its five year commission. Particular attention was paid to the interpretation of findings drawn from the autopsy of dead furnaces, in the context of the live furnace state, and the correlation of data regarding cohesive zone configuration, level, and furnace performance. The results of this intense research activity are presented here in the hope that they will serve not only as a source of enrichment to the professional knowledge of researchers and operators, but also as textual material for graduate students in the field of metallurgy.
https://magrudy-assets.storage.googleapis.com/9781851660575.jpg
524.990000 USD

Blast Furnace Phenomena and Modelling

by Iron and Steel Institute of Japan
Hardback
Book cover image
A problem-solving manual for those who manage boilers and/or cooling water units in commercial and industrial plants. It is particularly useful to plant operators who have mechanical engineering backgrounds only, because essentials of water chemistry as well as mechanical factors are covered. The ne
Solutions To Boiler and Cooling Water Problems
A problem-solving manual for those who manage boilers and/or cooling water units in commercial and industrial plants. It is particularly useful to plant operators who have mechanical engineering backgrounds only, because essentials of water chemistry as well as mechanical factors are covered. The ne
https://magrudy-assets.storage.googleapis.com/9780442005016.jpg
230.990000 USD

Solutions To Boiler and Cooling Water Problems

by C.D. Schroeder
Hardback
Book cover image
The safe operation of computer systems, in both their software and hardware continues to be a key issue in many real time applications, when people, environment, investment or goodwill can be at risk. Such applications include the monitoring and control of high energy processes, of nuclear and chemical plants, of ...
Achieving Safety and Reliability with Computer Systems
The safe operation of computer systems, in both their software and hardware continues to be a key issue in many real time applications, when people, environment, investment or goodwill can be at risk. Such applications include the monitoring and control of high energy processes, of nuclear and chemical plants, of factory automation, of transportation systems, or funds transfer and of communication and information systems. This book represents the proceedings of the 1987 Safety and Reliability Society Symposium held in Altrincham, UK, 11-12 November 1987. It is thus part of the series of proceedings for Society Events, which in previous years have not addressed the topic of the Safety and Reliability of Computer Systems. The book is also part of another series of reports, and is closely related to the Elsevier Book Safety and Reliability of Programmable Electronic Systems which I edited in 1986, and the series of workshops known as SAFECOMP held in 1979, 1982, 1983, 1985, 1986 which are referenced in some of the papers. The structure of the book represents the structure of the Symposium itself. The session titles, and the papers as selected represent the current practice in many industries. The trend is towards more industrial usage of Formal Methods, and tools to support these methods, whilst continuing to make best use of Software Engineering, Safety and Reliability Assessment, and accumulated experience.
https://magrudy-assets.storage.googleapis.com/9781851661671.jpg
262.490000 USD

Achieving Safety and Reliability with Computer Systems

Hardback
Book cover image
How to Use This Book The primary purpose of this book is to assist small companies, involved in both hardware and software, to devise and evolve their own quality systems. There are a number of national and now international standards which outline the activities for which procedures and records need ...
Quality Procedures for Hardware and Software: A Cost Effective Guide to Establishing a Quality System-Contains Manuals and Template Procedures
How to Use This Book The primary purpose of this book is to assist small companies, involved in both hardware and software, to devise and evolve their own quality systems. There are a number of national and now international standards which outline the activities for which procedures and records need to be specified. They are described and compared in Chapter 2, and the subsequent guidance in the book is intended to assist in meeting them. Although, at first sight, the operations of a hardware equipment developer may seem very different from those of a software house, the basic requirements of a quality system, such as the BS 5750 and ISO 1987 series of documents, are the same. For this reason the same standard can be called for in both areas and it will be seen, in Part 2, that suitable procedures can be derived to meet both types of operation. Quality standards (BS 5750, AQAP, ISO 9000 series) distinguish between companies carrying out, on the one hand, both design and manufacturing fixed functions and, on the other hand, those who only manufacture to specifications. In practice, the lesser requirements (those applying to manufacture to fixed specifications) are common to both levels of standard and the additional controls pertaining to design are added to obtain the higher standard. Chapter 2 explains the differences in detail.
https://magrudy-assets.storage.googleapis.com/9781851665501.jpg
103.950000 USD

Quality Procedures for Hardware and Software: A Cost Effective Guide to Establishing a Quality System-Contains Manuals and Template Procedures

by John S. Edge, David J. Smith
Hardback
Book cover image
This book was written with a dual purpose, as a reference book for practicing engineers and as a textbook for students of prestressed concrete. It represents the fifth generation of books on this subject written by its author. Significant additions and revisions have been made in this edition. Chapters 2 ...
Modern Prestressed Concrete: Design Principles and Construction Methods
This book was written with a dual purpose, as a reference book for practicing engineers and as a textbook for students of prestressed concrete. It represents the fifth generation of books on this subject written by its author. Significant additions and revisions have been made in this edition. Chapters 2 and 3 contain new material intended to assist the engineer in understanding factors affecting the time-dependent properties of the reinforcement and concrete used in prestressing concrete, as well as to facilitate the evaluation of their effects on prestress loss and deflection. Flexural strength, shear strength, and bond of prestressed concrete members were treated in a single chapter in the of flexural strength has third edition. Now, in the fourth edition, the treatment been expanded, with more emphasis on strain compatibility, and placed in Chapter 5 which is devoted to this subject alone. Chapter 6 of this edition, on flexural-shear strength, torsional strength, and bond of prestressed reinforce ment, was expanded to include discussions of Compression Field Theory and torsion that were not treated in the earlier editions. In similar fashion, expanded discussions of loss of prestress, deflection, and partial prestressing now are presented separately, in Chapter 7. Minor additions and revisions have been made to the material contained in the remaining chapters with the exception of xv xvi I PREFACE Chapter 17. This chapter, which is devoted to construction considerations, has important new material on constructibility and tolerances as related to prestressed concrete.
https://magrudy-assets.storage.googleapis.com/9780442319236.jpg
398.990000 USD

Modern Prestressed Concrete: Design Principles and Construction Methods

by James R. Libby
Hardback
Book cover image
Applied Solid Mechanics: 3rd Conference
https://magrudy-assets.storage.googleapis.com/9781851664351.jpg
450.450000 USD

Applied Solid Mechanics: 3rd Conference

Hardback
Book cover image
Optimization of Structural Systems and Industrial Applications: Computer Aided Optimum Design of Structures 91.
https://magrudy-assets.storage.googleapis.com/9781851666690.jpg
619.500000 USD

Optimization of Structural Systems and Industrial Applications: Computer Aided Optimum Design of Structures 91.

Hardback
Book cover image
Injection Molds and Molding: A practical manual
https://magrudy-assets.storage.googleapis.com/9780442217853.jpg
262.490000 USD

Injection Molds and Molding: A practical manual

by Joseph B. Dym
Hardback
Book cover image
Application of Multivariable System Techniques (AMST 90)
https://magrudy-assets.storage.googleapis.com/9781851664818.jpg
362.250000 USD

Application of Multivariable System Techniques (AMST 90)

Hardback
Book cover image
Developments in Injection Moulding
https://magrudy-assets.storage.googleapis.com/9780853349686.jpg
367.490000 USD

Developments in Injection Moulding

Hardback
Book cover image
Finite Element Analysis: Education and training
https://magrudy-assets.storage.googleapis.com/9781851667062.jpg
261.450000 USD

Finite Element Analysis: Education and training

Hardback
Book cover image
Boundary Element Technology VI
https://magrudy-assets.storage.googleapis.com/9781851666683.jpg
376.950000 USD

Boundary Element Technology VI

Hardback
Book cover image
Teleoperation and Robotics: Evolution and development
https://magrudy-assets.storage.googleapis.com/9780850385885.jpg
262.490000 USD

Teleoperation and Robotics: Evolution and development

by Jean Vertut, Philippe Coiffet
Hardback
Book cover image
Injection Moulding Machines
https://magrudy-assets.storage.googleapis.com/9780853342458.jpg
398.990000 USD

Injection Moulding Machines

by A. Whelan
Hardback
Page 1 of 3